Dollar Tree Grinch Christmas

Christmas will be here before you know it, and it is time to start planning your decorations. When I think of Christmas, I imagine Santa Claus and the Grinch. So, in this post, I’ll walk you through the steps of making this lovely Grinch Arm.

YOU WILL NEED THE FOLLOWING SUPPLIES TO MAKE YOUR GRINCH ARM:

  • Candy cane from Dollar tree
  • Santa scarf
  • An Ornament
  • Red ribbon
  • Wire cutters
  • Swiffer mop head 
  • Car wash mitt

STEPS:

  1. The first step is to snip the end of the Santa scarf so we can slide it up around the candy cane form.
  2. Once I had that up there and made sure I had enough material, I cut the bottom off and folded under the fuzzy ends before hot glueing it together.
  3. Once that was done, take the red ribbon and tie it on the first rang above the end. So that we could have it there later and know that it was secure and would hold your  ornament.
  4. Then cut the bottom pieces of the candy cane from off, also do cut the ends off, so they didnt stick to your little glove, so it should be without prongs. 
IMG_0585
IMG_0587

5. So then  take  the glove and  cut it into what was five fingers, Shook off the fuzz again. Glued those together, expect for the left finger, and  left a little area in to stick the ribbon through. 

6.Set it aside and, once your fingers are open enough on the end, grab the red ribbon and pass it through the finger where you left the little hole to get it out the bottom. You are free to do whatever you want with this. So it’s a struggle to get those tiny figures onto the wire, which you left out. 

7. So, once you’ve got it on there, glue the top of the mitt to each of the wires and really push it in, so it doesn’t move.

8. Then pull up the Santa scarf, fold it in, and glue it down as close to the fuzzies on the car mitt as possible. So, once that’s done, make sure you get it in there well and that it doesn’t fall off.

9. Then, take the sweeper head and cut a strip out of it. (Use your fur if you have it).

10. So start from the back so there are no seams when you hang it up, and then hot glue it all the way around to create the fur on the end of the Santa suit.

11. So grab your fingers and string, then go ahead and put the ball on it at the end.  So it appears like  as if holding the ornament, tie it before cutting off the excess. Later, glue the small opening you left for the ornament to pass through. (Alternatively, a pipe cleaner could be used.  That way, you could sort of move it.

PIN IT!!

3

DIY Mini Gum-Ball Machine

In just a few simple steps, you can create these adorable mini gumball machines. Small flower pots can be used for the base, and a clear ornament filled with pom poms can be used for the top. Being so simple, this craft can easily be done as a group activity as well. This is an excellent choice for a Carnival or Arcade Theme. You could even make these and give them as gifts!

TO MAKE YOUR MINI GUMBALL MACHINE, YOU WILL NEED THE FOLLOWING SUPPLIES:

I used two coats of paint on the flowerpot and lid. Depending on your color selection, you may require a third coat – allow each coat to dry properly before doing another one. To keep the small glass jar from falling off the pot, I used hot glue and e6000 glue. For a handle, I used a small pompom, but anything would work. I made a bow out of the coordinating ribbon and added a daisy for some extra cuteness.

STEPS:

  1. I used two coats of paint on the flowerpot and lid. Depending on your color selection, you may require a third coat – allow each coat to dry properly before doing another one.

  2. To keep the small glass jar from falling off the pot, I used hot glue and e6000 glue.

  3. For a handle, I used a small pompom, but anything would work.

  4. I made a bow out of the coordinating ribbon and added a daisy for some extra cuteness.
IMG-3414
IMG-3434

As you can see, I used this adorable little spring decor item on a small cake stand with a couple of other coordinating décor pieces, and I adore it. 

To match your decor, you can make this DIY with any size flower pot, a jar or even a fishbowl.

The colors used make me happy, and I hope you can try this DIY and smile every time you look at it. This gumball machine would go perfectly with the Spring Flower Trio, which you can find here.<br><br>

It’s simple and enjoyable to make it your own for any holiday and any décor. Make a note of it and pin it where you can find it later. A detailed video is also available here.

PIN IT!!

2

Spring Flower Trio Craft Tutorial

For those of you who know me, you would know by now that I love to make simple crafts with things that are easily found around the home! Spring is a time to give our home some fresh bright color. In this post I will guide you through the process of creating this gorgeous Spring Flower Trio
Spring Flower Trio

TO MAKE YOUR SPRING FLOWER TRIO, YOU WILL NEED THE FOLLOWING SUPPLIES:

  • Mod podge
  • Glue gun
  • Sandpaper
  • Wooden flowers
  • Wooden spools (but you can be creative)
  • Sturdy stems – I used a chopstick and 2 straws
  • Scrapbook paper – fabric – ribbon of your choice – I usually choose 3-4 coordinating colors so I can pick and choose from those for all embellishing
  • Embellishments like buttons – flowers – jewels etc
  • Wood base for your flowers

STEPS:

1. Make your flowers out of scrapbook paper by tracing and cutting them out. It is not necessary to be precise when cutting them out because, after they have dried, you will sand them. 

Tip* If you can’t find any wood flowers, you can cut them out of cardboard. Simply make sure it’s durable and also that you cut it into three different sizes.

2. To stick your paper to the wood or cardboard, you’ll need to use mod podge. If you’re using wood flowers, sand the edges to give them a “shabby” appearance. In case you are using cardboard, you can skip this step.

3. I used coordinating paint colors to paint the backs of my flowers, but you could also use additional paper or embellishments.

4. After the flowers have been sanded and painted, add your embellishments to the center to complete the flower look. This is where you’ll layer it until you’re pleased with it. I used paper, fabric, and buttons. I just kept rearranging them until they were just right for me. I only glued the center parts down with hot glue. This gives it a whimsy appearance.

5. Because my wooden spools were empty, I used the opportunity to wrap them in the coordinating ribbon. I hot glued one end, wrapped the ribbon around it, and then glued the other end.

6. I painted the small piece of fence board that I used for the bottom white, but you can use your imagery when picking a base.

7. I measured the heights of my stems before gluing them on. Because I didn’t want to cut the chopstick, I used it first to give it some height. I did know I could cut the straws down, so I glued them in place and cut them when the height was correct.

8. I hot glued the spools in place and stuck the stems into them once I had them where I wanted them. I glued the stem in with the glue that came up through the spool. If you don’t want to cut them down right away, let the spools dry before gluing the stems in place.

9. You’re almost done, but there are a few things left to do. To add some “leaves,” I ripped my fabric and tied it to my stems.

10. Such a diy can be used for any holiday décor. Making it your own is a lot of fun. 

You’ve got it now. A new piece of Spring decor to add brighten up your home that will make you smile every time you see it. A detailed video is also available here to help you create your Spring Flower Trio. Save the Pin below to your Pinterest to return to the project when you have all your supplies ready.


Let me know what you think in the comments.

PIN IT!!

WhatsApp Image 2022-03-28 at 7.55.04 PM